1. This product is a single component, neutral cure, oxime type, low modulus silicone sealant should be compatibility and adhesion test adhesive material prior to use, in order to confirm qualified construction .
2. Neutral curing, non-corrosive.
3. Good resistance to weather aging resistance, ultraviolet radiation, ozone resistance, water resistance.
4. The unique red cap, avoid glue dried, can be reused after opening.
*Packing style, please prevail in kind!
1, will want to seal parts clean, remove oil, dust;
3, using a knife cut head sealant, glue and tighten the muzzle, glue gun injection spray, smooth squeeze glue gun, a 45-degree angle construction, were hit on crevice sealant;
4, along the surface sizing, ball stick to smooth the surface modification of colloid to remove excess colloidal colloids in the early hours ago can not be cured to touch;
5, the remaining sealant needs unique twist on red lid, to avoid air-dried.
1. sealant construction sites should pay particular attention to maintaining good ventilation; place where children can not reach to avoid eating; if accidental eye contact with the uncured adhesive, should be cleaned with plenty of water and consult a doctor.
2. The following dry conditions and 27 ℃ storage, to extend the effective life of the product, shelf life of 12 months.
3. Most materials produce strong adhesion, but the surface must be clean and free of grease.
4. The material of construction should not be used for surface temperature is below 5 ℃ or over 40 ℃.
版权所有© 2018 天津市叁零叁建材有限公司 津ICP备18003090号